設備配置/Equipment disposition 型號/model：JDW300-F1212懸臂式數控切割平臺/F1212 flying-arm work table of the CNC water jet 結構形式/stucre：懸臂式/ flying 切割范圍（X*Y）/cutscope（X*Y）：1300mm*1300mm X軸行程/Travel of X axis：1300mm Y軸行程/Travel of Y axis：1300mm Z軸行程/Travel of Z axis：200mm CNC控制系統/CNC Controlling system：交流伺服系統/AC Servo System 切割精度/Cutting accuracy：±0.1mm 重復定位精度/Repeatability accuracy：±0.05mm 電源/Power supply：380V/AC,50Hz/60Hz Z軸電動控制升降/Motorixed Z axis 奈凱CNC控制系統/Naiky CNC Control System 日本三菱交流伺服電機、驅動器/Mitsubishi AC servo motor and driver(JAPAN) 超高壓系統/High Pressure Pump JDW300Mpa超高壓發生器/JDW300Mpa High pressure generator 較高壓力/Max .pressure:320Mpa 增壓比/lntensifier ratio: 24:1 較大排水量/flow rate: 5L/min 進水壓力/lnlet wateor pressure: 0.4Mpa 油泵較大排量/Max.pump outflow: 80L/min 油泵較大壓力/Max.pump pressure: 21.5Mpa 油箱容量/Volume of oiltank:260L 主電機功率/Main motor power: 22Kw 電源/power supply: 240V/380V/415V/50Hz/60Hz 一體化磨料切割頭/Abrasive cutting head 較大寶石尺寸/Max oriflce size: 0.33mm 較大砂管直徑/Max nozzle: 0.76mm 高壓水開關/High-pressured water switch 氣動閥門，可以實現高壓水的瞬間開啟和關閉/Air-drivng valve with a function of the instant ON/OFF the hi-pressure water 通過NC輔助功能實現自動控制/The auto controlling over the ON/Off pressure water can be achieve by NCN function