高速玻璃清洗機A系列 HIGH-SPEED GLASS WASHING MACHINE SERIES-A ■ 鋁合金模塊化拼裝結構，觸摸屏 PLC控制，操作界面簡單易懂。  ■ 三對毛刷(Φ160 ㎜ )不銹鋼軸頭，上部硬毛刷配置氣缸可單獨提升，特制軟毛刷可洗low-e玻璃，普通鍍膜玻璃。 ■ 主傳動為斜齒傳動，變頻調速，清洗機毛刷分別由上下兩組電機單獨齒帶傳動，轉速平穩，使用壽命更長。 ■ 快速自動厚度調節，升降高度300mm，方便內部保養。 ■ 設備配有單獨溫控系統（風加熱及水加熱裝置），風機使用熱風回收系統達到節能，效率高。 ■ 可與高速雙邊機，上下片等設備對接，實現自動化生產線。 ■ Aluminum alloy assembly structure, touch screen PLC control system, operating interface is simple and easy to understand. ■ Three pairs hair brush(Φ160 ㎜ ) with stainless steel shaft, the up hard hair brush is controlled by pneumatic cylinder and can be lifted up independently, so the soft hair brush can wash the LOW-E glass, common coating film glass. ■ Helical teeth transmission driving system, frequency speed adjustment. ■ The up and lower washing brushes are drive by two groups of independent gear belt system, with steady speed and longer working life. ■ Convenient thickness adjustment, the whole section can hoist 300mm to facilitate inner clean. ■ Can be equipped with air and water heating system. ■ Can connected with high-speed double edging machine, automatic glass loading and unloading system to realize automatic processing. l 三對拼裝式風刀 l 配置雙風機,清洗速度低于12M/min l 一臺風機工作清洗速度高于12M/min l 二臺風機工作，達到節能效果 l Three pairs of special designed integrated aluminum air blades l Two blowers for selection, more choice to saving energy l Speed lower than 12m/min, use 1 blower l Speed higher than 12m/min, use 2 blowers