BT 全自動雙工位吹瓶機 一、電控系統：進口原裝 PLC 電腦加入機界面（中文或英文）控制，彩色觸摸式操作屏操作。所有工藝設定、改變、檢索、監控故障診斷等功能均在觸摸屏上實現，無點接觸工作原理，元器件耐用。 二、液壓系統：比例壓力控制，配備油研液壓元器件，穩定可靠。 三、塑化系統：塑化混煉螺桿，確保塑料塑化充分、均勻。 四、調速系統：變頻調速 + 合金鋼硬齒面減速箱，調速平穩，噪音低，經久耐用。 五、開合模、移模系統：移模和開合模都采用雙線導軌的合模機構，精度高，阻力小、速度快。 ◆ Electrical system: Japan Mitsubishi PLC and man-machine interface (Chinese or English), color touch screen. All the technical parameter setting, modification, indication, trouble shoot and so on function can be realized on the touch screen all the components are longer working life. ◆ Hydraulic system: Proportional pressure control, with imported Yuken hydraulic components, providing reliable control. ◆ Plasticiser system: High-efficient mixing screw to ensure the melt to be good quality. ◆ Speed-adjusting system: Invertors and alloy hard gear-surface reducer guarantee the speed to be smooth adjustment, longer working life. ◆ Mold-clamping, mold-moving system: Horizontal mold-moving system with high precision, less stress and high speed.    技術參數 Technical parameters: 序號名稱 Name數據說明NumberDateRemark1制品容量 Product volume(L)6L2合模次數 Clamping times60-300 次 /hr3螺桿直徑 Diameter of screwΦ6538CrMoALA4螺桿長徑比 Screw (L/D)ratio25/15塑化能力 Plasticizing capacity60-90kg6驅動功率 Driving power11kw變頻7溫控段數 Heating segments48加溫功率 Heating power16kw9升降范圍 Lift range0-150mm10鎖模力 Clamping force78kn11模板間距 Platen opening stroke150-550mm12模板安裝尺寸 Mold size350×460mm13模板參考厚度 Mold thickness155-300mm14較大口模直徑 Max diameter of die head150mm15加熱參考功率 Heating power6kw16溫控段數 Heating segments317總裝機參考功率 Total power40kw18平均能耗 Average energy consume28kw19耗氣量 Air consume1m3/min20外形尺寸（長 × 寬 × 高 Dimension4000×2300×2800mm(LxWxH)21機組總重量 Weight6.5T