BJ-6800系列水性光油(Series Water-borne Gloss Varnish) BJ-6800系列水性光油主體以單組份、稀釋劑、輔助劑三大類組成，具有無色、無味、透明感強且無毒、成本低，有良好的光澤性、耐磨性、耐彎曲性、的附著力、抗紫外線耐黃變、不燃不爆、對環境無污染等特點。水性光油的施工面積每公斤比油性光油要多2至3平米，比油性光油更經濟實惠，成本更低，是油性光油的較佳替換產品。 適用于五金（運動器材、自行車）、玻璃燈飾、碳纖維等產品上涂裝。 BJ-6800 Series Water-borne Gloss Varnish is mainly composed of single composite, diluents and adjuvant. Colorless, odorless, non-poisonous, and with a strong transparent feeling, it is less expensive. This kind of varnish material has great glossiness, abrasion performance and bending resistance, and has excellent adhesive force. Resisting to UV for anti-yellowing and being Non -burning and non –burst, it is pollution-free. This varnish is 2 to 3 square meters (per KG) more than oily gloss coating. Being more economical and more effective, it is the best substitute product for oily gloss coating. It is applied in coating metal parts (sports equipment, bicycles), glass decorating lights, and carbon fiber products. 漆膜性能與參數指標（Properties And Parameters）               注：測試板為打磨過的麻口鐵，烘烤可根據溫度的高低調整烘烤時間。 Note: Tinplate was used for the sampling. The drying time can be adjusted according to high or low temperatures. 施工說明： 本產品適用于油性烤漆的所有施工工藝，但不可與其他公司的產品摻合使用，施工環境、配漆器具必須干凈。光油稀釋后，請攪拌均勻，用濾布過濾，靜置消泡后方可施工。涂裝后的工件需靜置流平，再進行烘烤，烘烤的溫度和時間決定漆膜的性能。 How to use This product is applicable to all oily baking varnish. However, do not use it together with other company’s products. Keep the tools and the environment clean. After diluting the varnish, stir it to make it equal. Only when the bubbles are gone can it be used. Coated tools must be stewed and leveled before drying. The coating effect is subject to the drying temperature and the drying time.