全自動玻璃噴砂機FY-PS   該設備主要用于平板玻璃的噴砂工藝和雕刻工藝，可全自動和手動操作，采用 PLC控制。噴砂的高度和寬度可以通過控制系統調整參數，達到不同的生產需求。配有除塵系統，基本達到無塵加工。 氣源要求： 空氣壓力：0.3-0.8MPa  空氣流量：5m³/分鐘 該設備已經獲得CE認證。 配置 1.      3把自動槍，1把手動槍 2.      PLC和觸摸屏：日本三菱 3.      編碼器：歐姆龍 技術參數Parameter   型號 Type 厚  度 Thickness (mm) 外 尺 寸 Outside size (mm) 較大尺寸Maxi (mm) 功 率Power (KW) 電 壓Voltage (V/Hz) 速 度 Speed (m2/h) 價格 FOB USD FY-PS2000 5-30 7400*1500*2780 3000*2000 3.5 380/50 12-18 9538.5 FY-PS2500 5-30 7400*1500*3300 4000*2500 3.5 380/50 20-30 11077       Automatic glass sandblasting machine is mainly used for sandblasting flat glass. It has two functions: automatic and manual operation. It is controlled by PLC. Height and width of blasting by control system to adjusting parameter can meet different production requirements. With dust collector system. It basically is dust-free environment.   The machine is accordance with CE standard. Air source of exterior :  Air pressure :  0.3~0.8MPa  Air output : 5m3/min 1m3 gas storage and purifying equipment for compressed air are needed     Parameter Type Thickness (mm) Outside size (mm) Maxi (mm) Power (KW) Voltage (V/Hz) Speed (m2/h) Price (USD) (FOB) FY-PS1500 3-30 4800*1500*2300 3000*1500 3.5 380/50 13 10,000 FY-PS2000 3-30 7400*1500*2780 3000*2000 3.5 380/50 13 14,600 FY-PS2500 3-30 7400*1500*3300 4000*2500 3.5 380/50 13 16,700   Main Accessory list: 1.       electrical appliance:  Schneider 2.       PLC and touch screen:  Mitsubishi 3.       encoder:  Omrom 4.       button: Benli (CE) 5.       motor: famous brand (CE) 6.        three PCS AUTO gun and one PCS manual gun