高速節能玻璃清洗機D系列 HIGH-SPEED & ENERGY SAVING GLASS WASHING MACHINE SERIES-D ■ 鋁合金模塊化拼裝結構，觸摸屏 PLC控制，操作界面簡單易懂。 ■ 三對毛刷(Φ160 ㎜ )不銹鋼軸頭，上部硬毛刷配置氣缸可單獨提升，特制軟毛刷可洗low-e玻璃，普通鍍膜玻璃。 ■ 主傳動為斜齒傳動，變頻調速，清洗機毛刷分別由上下兩組電機單獨齒帶傳動，轉速平穩，使用壽命更長。 ■ 快速自動厚度調節，升降高度300mm，方便內部保養。 ■ 設備配有單獨溫控系統（風加熱及水加熱裝置），風機使用熱風回收系統達到節能，效率高。   ■ 可與高速雙邊機，上下片等設備對接，實現自動化生產線。 ■ Aluminum alloy assembly structure, touch screen PLC control system, operating interface is simple and easy to understand. ■ Three pairs hair brush(Φ160 ㎜ ) with stainless steel shaft, the up hard hair brush is controlled by pneumatic cylinder and can be lifted up independently, so the soft hair brush can wash the LOW-E glass, common coating film glass. ■ Helical teeth transmission driving system, frequency speed adjustment. ■ The up and lower washing brushes are drive by two groups of independent gear belt system, with steady speed and longer working life. ■ Convenient thickness adjustment, the whole section can hoist 300mm to facilitate inner clean. ■ Can be equipped with air and water heating system. ■ Can connected with high-speed double edging machine, automatic glass loading and unloading system to realize automatic processing. l三對風刀: 一直一斜一直設計 l兩臺風機工作自由選擇，更節能 l速度低于12M/min,一臺風機 l速度高于12M/min，二臺風機工作 lThree pairs of special designed integrated aluminum air blades  1 straight 1 inclined 1 straight structure lTwo blowers for selection, more choice to saving energy lSpeed lower than 12m/min, use 1 blower lSpeed higher than 12m/min, use 2 blowers